|
|
Post by Woz on Jul 6, 2009 19:38:28 GMT -5
Here's how I make the weapons on a Valkirye interchangable- Drill the wing mounts (its easier to do this with it still on the spruce)  Then drill the rocket pods (so the holes line up).  Stick pins in the rocket pods-  Add epoxy resin to the inside to stop the pins being pushed back into the rocket pod.-  Cut the pins to length (sorry no pic) Add small magnets to the side weapons and the part it's meant to be fixed to (using a bit of plasticard).  Thats it-    |
|
somethingyellow
Guardsman
http://commissar.proboards.com/index.cgi?board=picpost&action=display&thread=5989
Posts: 84
|
Post by somethingyellow on Jul 7, 2009 6:09:05 GMT -5
Very nice tutorial! I just put all of the weapons on my Valk. You just need a bit of Greenstuff and Viola! (& maybe if I'm playing against someone whom dosen't know the Imperial Guard rules, I could use all of the weapons mwahaha  ) This is a bad pic, it was taken when I was still painting it..  |
|
|
|
Post by soundwarp on Jul 7, 2009 15:29:26 GMT -5
The Rockets get the pins aswell i assume?
|
|
|
|
Post by Woz on Jul 7, 2009 15:35:42 GMT -5
The Rockets get the pins aswell i assume? No, the missile fins slot into the wing pylon. |
|
|
|
Post by soundwarp on Jul 8, 2009 1:28:31 GMT -5
Ahhhhh, my bad.
|
|
|
|
Post by Col. Corbane on Aug 7, 2009 12:05:40 GMT -5
|
|
|
|
Post by sirbebox on Sept 1, 2009 13:35:32 GMT -5
These are great and easy conversions i do this to all my valkeries now good show.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2009 19:22:25 GMT -5
Just got a valkyrie the other day and I'm loving every minute of it's assembly. It really is a beautiful kit. This guide was very helpful, so thanks.
|
|
|
|
Post by Cadian 117 on Sept 11, 2009 6:41:58 GMT -5
|
|
|
|
Post by stovrose on Sept 25, 2009 7:25:34 GMT -5
How does the pins hold the weapons in? I just did mine using this guide and the missle pods just fall right off. I think the holes are a little bigger than the pins and that is giving me trouble.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 19, 2009 3:26:27 GMT -5
I just done a single "post" pin on the rocket pods. And glued in place the Lascannon. But its a good guide. thank you  |
|
|
|
Post by Adam Selene on Mar 11, 2010 6:58:56 GMT -5
probbably will not use this for valks as i don't have any but will try it for sentinals :]
|
|
|
|
Post by 3ff3ct on Mar 11, 2010 11:55:30 GMT -5
Thanks Woz, I'll have to have a go at this with my next valk.
|
|
)
