|
|
Post by Jackal-0311 on Aug 21, 2011 0:13:50 GMT -5
So I tried to use a black wash for the first time on my chopper....  Is there anything I need to know about washes...secrets/tricks? How to apply it? How many coats? Do you wipe the excess. What about inks? I wanted some definition with my chopper, so I used a black wash in the recesses. I used a thick brush and applied it liberally to the recesses and wiped the excess. But it left a residue. Do need to go back and then touch up? If I want a weathered look can apply it all over and then wipe down? Thanks all. |
|
|
|
Post by The Guardsmen on Aug 21, 2011 6:02:27 GMT -5
I find that the best way to add definition to a model is to take the wash and dilute it (a 2:1 mix of water and Wash) and then brush it over the entire model. It usually takes between 1-3 coats
|
|
|
|
Post by The Envoy (AWOL) on Aug 21, 2011 6:31:45 GMT -5
Washes are very handy, but you really want to apply them in layers than one thick coat. Liberal application usually doesn't end well, as you learned.
I also recommend that when you paint them on, go against the recesses, as it lets the wash settle in better, and don't try to paint it in.
|
|
|
|
Post by 3ff3ct on Aug 21, 2011 10:27:15 GMT -5
I find that the best way to add definition to a model is to take the wash and dilute it (a 2:1 mix of water and Wash) and then brush it over the entire model. It usually takes between 1-3 coats What he said. You can always add more if it isnt dark enough  |
|
|
|
Post by Jackal-0311 on Aug 21, 2011 14:21:14 GMT -5
Washes are very handy, but you really want to apply them in layers than one thick coat. Liberal application usually doesn't end well, as you learned. I also recommend that when you paint them on, go against the recesses, as it lets the wash settle in better, and don't try to paint it in. Can you explain what you mean by don't it in? |
|
|
|
Post by 3ff3ct on Aug 21, 2011 16:00:11 GMT -5
Slap it on there, let it flow into recesses naturally. It looks really wierd if you paint it into the details. Highlights can always be added afterwards if theyre needed
|
|
|
|
Post by Jackal-0311 on Aug 21, 2011 18:49:06 GMT -5
cool! thanks guys!
|
|
|
|
Post by The Envoy (AWOL) on Aug 21, 2011 22:13:15 GMT -5
Slap it on there, let it flow into recesses naturally. It looks really wierd if you paint it into the details. Highlights can always be added afterwards if theyre needed What he said. Sorry, was running out the door as I was writing that. |
|
