|
|
Post by kennyjapan on Sept 21, 2011 14:03:21 GMT -5
|
|
|
|
Post by 3ff3ct on Sept 22, 2011 5:15:46 GMT -5
I think 'just go for it' would be my advice, I think with a bit of care this could be easily acheivable and lok great! I think even I might be able to do it.... So it must be pretty easy! Good luck, and please stick up some picks of your sucessful 'bank robbers'!  |
|
|
|
Post by missilemaster on Sept 22, 2011 10:58:06 GMT -5
If you want the faces to show on a couple you can just take a few spare heads and shave off a little here and there before putting stuff on, maybe even cut out the eyes and stick them in a ball of green stuff and then just touch up, add and adjust as you go. Remember to have the ears and nose sticking out, if it's just a blob it will look dumb. You could try to cut off a piece of a sprue and model a few test heads on it first to see how it turns out, maybe even use the sprue plastic as a base which you build stuff around... Like, take the sprue, cut it up and thin it into a pole which you then cut into pieces and stick to another sprue to practise modeling the heads around, and then when you're comfortable with modelling you can stick them on guardsman bodies and do the real thing (I recommend keeping the testheads by themselves instead of trying to recycle them for the guardsmen). Get a good shape and maybe even texture first, then add the visors afterwards. Don't take this as a 'tip', the smart way to do things, but a suggestion as to how you could approach it.
|
|
|
|
Post by kennyjapan on Sept 22, 2011 12:27:26 GMT -5
thanks for advice guys =) i dont have any lessons tomorow meaning i have all night to try it out without having to worry about hwk
|
|
|
|
Post by missilemaster on Sept 22, 2011 19:46:47 GMT -5
Good luck and keep your fingers wet.
|
|
|
|
Post by 3ff3ct on Sept 24, 2011 13:18:55 GMT -5
Im sigging that ^ ;D
|
|
