|
|
Post by 3ff3ct on Nov 7, 2011 8:54:47 GMT -5
I can imagine melting down plastics in a wax heating pot would work... like the kind chicks use to heat the wax for doing waxing strips etc... I might try that also, got loads of dead sprues I imagine that plastic and wax have vastly different melting points.... Otherwise all GWs stock would melt on hot days, and their warehouse would have to be refrigerated. And my girlfriend could wax her legs and other areas with my leftover sprue clippings. @rt: I'm sure he'll do as he wants with them, I just thought I would urge caution as I know I can't afford any lawsuits right now!  |
|
|
|
Post by 9th Company on Nov 7, 2011 11:50:33 GMT -5
I highly recommend EasyFlo 120 Polyurethane Liquid Plastic instead of green stuff. It will be messy but gives better results and hardens in about 15 minutes so mass production is even easier
|
|
|
|
Post by Rolling Thunder on Nov 8, 2011 9:51:50 GMT -5
@rt: I'm sure he'll do as he wants with them, I just thought I would urge caution as I know I can't afford any lawsuits right now! There's caution, and there's timidity. GW can't touch you unless you actually use their Intellectual Property - or they'd have shut down their competitors a long time ago. - Also, GW can't sue you for recommending an action he takes that may or may not be found to be a breach of their IP laws. |
|
|
|
Post by ElegaicRequiem on Nov 8, 2011 11:34:49 GMT -5
This stuff could be the answer to a couple problems of mine.
Thanks, Ashotninja.
|
|
|
|
Post by Vice-Shogun Himura on Nov 9, 2011 22:09:23 GMT -5
Coolminiornot's store has it for you NA people.
|
|
fianoglach
Guardsman
Courage in our hearts, Commitment to our promise, Strength in our limbs
Posts: 84
|
Post by fianoglach on Nov 10, 2011 6:48:24 GMT -5
Anyone got a linky for anywhere that sells this stuff online and ships internationally?
|
|
|
|
Post by 9th Company on Nov 10, 2011 7:01:18 GMT -5
Ebay should be a good bet. I know one seller sells instant mold in strips of 10 as well
|
|
|
|
Post by 9th Company on Nov 10, 2011 7:12:36 GMT -5
Ebay should be a good bet. I know one seller sells instant mold in strips of 10 as well
|
|
|
|
Post by Woz on Nov 10, 2011 9:04:54 GMT -5
|
|
|
|
Post by Gerner on Nov 10, 2011 11:06:21 GMT -5
Can you cut in it?
|
|
|
|
Post by Woz on Nov 13, 2011 22:25:19 GMT -5
Yes you can cut it.
When it's hard it's like the glue sticks that you use in hot glue guns and when it's been heated its like blu-tack
|
|
|
|
Post by 3ff3ct on Nov 15, 2011 4:04:02 GMT -5
@rt: I'm sure he'll do as he wants with them, I just thought I would urge caution as I know I can't afford any lawsuits right now! There's caution, and there's timidity. GW can't touch you unless you actually use their Intellectual Property - or they'd have shut down their competitors a long time ago. - Also, GW can't sue you for recommending an action he takes that may or may not be found to be a breach of their IP laws. It's great having you Mods around, you are founts of knowledge that we mere members can only aspire to (you too Woz, love your painting always!  ) Otherwise Ashot would have been sat around at home twiddling his thumbs, and I'd have nothing cool to look at!  Anyone bought shares in Instant mold yet anyway? I hear their sales just went through the roof ;D |
|
|
|
Post by Col. Corbane on Nov 15, 2011 14:24:55 GMT -5
I think I'm going to have to get myself some of this, I've seen Ron from FTW do two part moulding with it, really impressive stuff.
|
|
) Otherwise Ashot would have been sat around at home twiddling his thumbs, and I'd have nothing cool to look at! 
