|
Post by zeke on Jul 10, 2012 18:42:43 GMT -5
Hey everyone. So, heres the story: My grandfather served in the United States Marine Corps for 25+ years as a tanker, and later an accountant. Now, back in the day, my Grandpa received a special lighter from his commanding officer, and it was his prized possession. Long story short, one of his daughters lost the gun barrel (it was a screw on), and threw it in a box assuming it was trash. Fast forward 30 years. While cleaning out their house, my mother found the tank lighter, not in so pristine condition. Long story short, she wanted to restore it and give it to my grandpa for his 80th birthday. I gladly volunteered to help fix it. My problem is that I pretty much, for lack of a better word, suck at mixing paints and weathering. If anyone could identify the best colors or weathering methods to match the bronze fade, I would greatly appreciate any and all help. Cheers, Zeke
|
|
|
Post by BG. Foster on Jul 11, 2012 0:46:32 GMT -5
|
|
|
Post by optimat on Jul 11, 2012 4:04:10 GMT -5
|
|
|
Post by Ponen19 on Jul 11, 2012 11:12:22 GMT -5
With a piece like that it might be better to just buff it nice and not paint it at all.
|
|
|
Post by Cosmic on Jul 11, 2012 12:15:55 GMT -5
I wholeheartedly agree with Ponen, I doubt it was painted in the first place (doesn't look like it) so I would just clean it and give it a good shiny polish!
|
|
|
Post by Trooper One-Nine-Seven-Four on Jul 11, 2012 15:22:54 GMT -5
Maybe take it to a jeweler and have them restore it?
|
|
|
Post by zeke on Jul 11, 2012 16:17:58 GMT -5
Well heres the thing:
I didn't plan on painting the actual tank, rather the barrel. Sorry I was not clear about that earlier. I already have a barrel (plasticard), but I have to paint it, and needed to know the best way to do so.
|
|
|
Post by Vice-Shogun Himura on Jul 11, 2012 20:36:02 GMT -5
With a piece like that it might be better to just buff it nice and not paint it at all. get some Brass/Bronze polish cleaner.
|
|
Pyrotechnics
Captain
Let the promethium burn it to a cinder!
Posts: 238
|
Post by Pyrotechnics on Jul 14, 2012 6:11:58 GMT -5
I'd say go to a jeweler and see if they can restore it properly with bronze.
|
|
|
Post by 3ff3ct on Jul 14, 2012 8:58:31 GMT -5
I'd say go to a jeweler and see if they can restore it properly with bronze. It looks more like brass to me. I'm pretty sure anybody with a bit of engineering know-how and the right tools could knock you up a new barrel in 5 mins (simply cut a new barrel from a length of brass tube and put a thread on it). I think it could be worth doing properly rather than a half-assed effort, as this is pretty damn cool
|
|